Ricoh Aficio 6110 Operating Instructions Manual page 162

Designating Areas
Right Angle Polygon and Polygon
1
Set your original on the exposure glass.
2
Press the [Area Editing] key.
3
Press the (R.A. Polygon) or
key.
4
Mark the first point with the editor pen.
5
Mark the next points.
Note
When you use Right Angle Polygon mode, mark
points that make right angles.
6
After making the last point, press the [Confirm
Selection] key.
7
Press the [Area Edit] key, specify your settings,
then press the [OK] key.
Reference
For details, see page 152.
8
Press the Start key.
Closed Loop
Limitation
If you specify an area with Closed Loop, you cannot specify any additional areas with other selection tools.
Note
When you color areas with the Closed Loop, the area boundary may shift depending on the image.
1
Set your original on the exposure glass.
2
Press the [Area Editing] key.
3
Press the (Closed Loop) key.
4
Touch on a point inside a closed loop.
146
(Polygon)