Ricoh Aficio 6110 Operating Instructions Manual page 243

8
Press the [Shading] key.
Note
The machine will start shading.
9
Pull out the film strip holder with the base film.
0
Lift the fresnel lens, place the film inside the po-
sitioning sheet, and lower the fresnel lens.
Note
Place the film face down.
If the film is curled, the copy image may be out of
focus. In this case, make the cut out film position
sheet a little smaller than the film size and use it to
hold the film down.
!
If needed, adjust the color, density, or focus.
Reference
For details, see page 228.
@
If needed, select the copier modes.
Reference
For details, see page 231.
#
Press the Start key.
$
Choose your next job.
Reference
For details, see page 232.
Selecting the Film Type and Performing Shading
1
2
1: Fresnel lens
2: Film
TRSR0Z0E
TRSR0P0E
227