3
4
1. Lock levers
Use to fix the film after setting it in the holder.
2. Film holders
Set 35mm film in one of these holders.
Slide holder: Set mounted positive films in this holder. (This holder is covered with glass.)
Film strip holder: Set negative or positive strip film and base film here.
Glass mount film holder: Set the positive glass mount films in this holder. (This holder is covered with
glass.)
3. Slide mount
Use to make a base film slide.
4. Base film slides
Use them when performing shading with Negative film.
5. Filters (P = Positive, N = Negative)
One of them should be set in the filter slot.
6. Blower brush
Use to clean the lens or glass.
2
5
Guide to Components
1
6
TRSR0B0E
209