Ricoh Aficio 6110 Operating Instructions Manual page 145

2
Make sure the [Color Balance] key is selected.
3
Press the [Color Balance Sample] key.
4
Select the range of densities (standard is the
current setting).
5
Set your original on the exposure glass.
6
Press the [Sample Area Selection] key.
7
Press the [Scan Start] key.
Note
The image of the original is displayed.
8
Point at the center of the area with the editor
pen, then press the [OK] key.
Note
For details about this display,
Color Balance—Adjusting and Storing the Color Balance
see page 142.
129