Loading Originals In The Document Feeder - Ricoh Aficio 1015 Copy Reference Manual

Copying
Loading Originals in the
Document Feeder
Note
❒ The original might become dirty if
it is written with a pencil or similar
2
tools.
❒ You cannot set a multi-page origi-
nal with pages of different sizes in
the document feeder. If your origi-
nal contains pages of different siz-
es, use the SADF function and set
each page one at a time. Alterna-
tively, set pages one at a time on
the exposure glass.
❒ Do not place any foreign objects on
the document feeder or cover it
with your hand. This could cause
the size not to be detected proper-
ly.
❖ ❖ ❖ ❖ ADF
1.
Sensor
Reference
Regarding originals that the docu-
ment feeder can handle, see P.10
"Originals".
22
Setting a stack of originals in the
document feeder
A
Adjust the guide to the original
size.
B
Set the aligned originals face up
into the document feeder.
1.
Limit mark
2.
Document guide
Note
❒ Do not stack originals above the
limit mark.
❒ To avoid a multi-sheet feed,
shuffle the originals before set-
ting them in the document feed-
er.