Loading Originals In The Document Feeder (Adf); Placing Standard Size Originals - Ricoh aficio 1013F Operating Instructions Manual

Copying
Loading Originals in the
Document Feeder (ADF)
Note
❒ The original might become dirty if
it is written with a pencil or similar
2
tools.
❒ Do not place any foreign objects on
the document feeder (ADF) or cov-
er it with your hand.
Reference
Regarding originals that the docu-
ment feeder (ADF) can handle, see
p.10 "Originals".
A A A A
Adjust the guide to the original
size.
B B B B
Place the aligned originals face
up into the document feeder
(ADF).
1.
Limit mark
2.
Document guide
20
Note
❒ Do not stack originals above the
limit mark.
❒ To avoid a multi-sheet feed,
shuffle the originals before set-
ting them in the document feed-
er (ADF).
Placing Standard Size
Originals
Note
❒ When the copy paper size and the
original size differ, follow the steps
below.
A A A A
Press the { { { { Menu} } } } key.
B B B B
Press the 0 0 0 0 or 1 1 1 1 key to select "3.
Original Size", and then press the
{ { { { OK} } } } key.
Note
❒ You can also enter this mode by
pressing the { { { { R/#} } } } key.
❒ When the bypass tray is select-
ed, the { { { { R/#} } } } key does not work
to enter this mode.