Date And Time Settings; Gps Sog/Cog Filter; Language; Simulator - Raymarine hsb2 PLUS Series Owner's Handbook Manual

7-10

Date and Time Settings

Set your preferred date format (DD/MM/YY or MM/DD/YY) and time
format (12 or 24 hour). If you wish to display local time, use the soft keys to
change from UTC to the required time offset. This can be up to plus or minus
13 hours, in hourly steps.

GPS SOG/COG Filter

The SOG/COG filter averages the velocity vectors calculated from the GPS
Signal to compensate for minor signal fluctuations. This gives a truer
indication of the vessel's real course and Speed Over Ground. The filter does
not affect the calculation of the GPS position. A low setting applies minimal
filtering and a high setting applies a large degree of filtering.
Select the SOG/COG filter setting as required. This can be set to HIGH ,
MEDIUM or LOW .

Language

Select the language in which you wish information to be displayed. The
selected language will be used for screen text, labels, menus and options, but
will not affect the letters displayed by the context-sensitive cursor. The
language setting also affects the display format for lat/long position
information.

Simulator

The simulator allows you to operate your display without data from the
antenna and/or external data sources. The system set up simulator options
have the following functions:
• Data provides simulated numerical data, and a waypoint display.
• Radar provides simulated radar picture, with example targets. The pic-
ture does not change if you change the range, although the range rings are
adjusted (see Chapter 3)
• Both provides simulated data and radar picture.
When the simulator is switched on, a SIMULATOR data box is displayed during
operation, showing the simulation selected.
2
PLUS Series Color LCD Display
hsb
.