Cisco Aironet 1130AG Series Hardware Installation Manual page 57

2-26 2-26
Troubleshooting Autonomous Troubleshoo ting Autonomous Access Points
This chapter provides troubleshooting procedures for basic problems with the autonomous access point This chapter provides troubleshooting procedures for basic problems with the autonomous access point
(models: AIR-AP1131AG). For the most up-to-date, detailed troubleshooting information, refer to the (models: AIR-AP1131AG). For the most up-to-date, detailed troubleshooting information, refer to the
Cisco Technical Support and Documentation website at the following URL: Cisco Technical Support and Documentation website at the following URL:
http://www.cisco.com/en/US/products/hw/wireless/tsd_products_support_category_home.html http://www.cisco.com/en/US/products/hw/wireless/tsd_products_support_category_home.html
Sections in this chapter include: Sections in this chapter include:
• • Checking the Autonomous Access Point LEDs, page 3-2 Checking the Autonomous Access Point LEDs, page 3-2
• • Checking Basic Settings, page 3-4 Checking Basic Settings, page 3-4
• • Low Power Condition for Autonomous Access Points, page 3-6 Low Power Condition for Autonomous Access Points, page 3-6
• • Running the Carrier Busy Test, page 3-14 Running the Carrier Busy Test, page 3-14
• • Running the Ping Test, page 3-15 Running the Ping Test, page 3-15
• • Resetting to the Default Configuration, page 3-15 Resetting to the Default Configuration, page 3-15
• • Reloading the Access Point Image, page 3-17 Reloading the Access Point Image, page 3-17
• • Obtaining the Access Point Image File, page 3-19 Obtaining the Access Point Image File, page 3-19
Obtaining the TFTP Server Software, page 3-21 Obtaining the TFTP Server Software, page 3-21
• •
C H A C
Cisco Aironet 1130AG Series Access Point Hardware Installation Guide Cisco Aironet 1130AG Series Access
OL-8369-04 OL-8369-04
H A P T P T E R E R
Access Points
Point Hardware Installation Guide
3 3