Diag-
nostic
Item
code
No.
d:62
Malfunction history code
erasure
• No history
• History exists
d:70
Control number
*1 If it is not possible to check the intake temperature, use the ambient temperature as reference (use
the compared values for reference).
Actuator operation table
Diag-
nostic
Item
code
No.
Cylinders-#1/#4 ignition
d:30
coil
Cylinders-#2/#3 ignition
d:31
coil
d:36
Injector #1
d:37
Injector #2
d:38
Injector #3
FUEL INJECTION SYSTEM
Meter display
0
• Displays the total number of
malfunctions, including the
current malfunction, that
have occurred since the
history was last erased.
(For example, if there have
been three malfunctions,
"03" is displayed.)
0–255
Actuation
Actuates the cylinders-#1/#4
ignition coil five times at one-
second intervals.
Illuminates the engine trou-
ble warning light.
Actuates the cylinders-#2/#3
ignition coil five times at one-
second intervals.
Illuminates the engine trou-
ble warning light.
Actuates the injector #1 five
times at one-second inter-
vals.
Illuminates the engine trou-
ble warning light.
Actuates the injector #2 five
times at one-second inter-
vals.
Illuminates the engine trou-
ble warning light.
Actuates the injector #3 five
times at one-second inter-
vals.
Illuminates the engine trou-
ble warning light.
8-75
Checking method
—
To erase the history, set the
engine stop switch from
"
" to "
".
—
Checking method
Check the spark five times.
• Connect an ignition
checker.
Check the spark five times.
• Connect an ignition
checker.
Check the operating sound
of the injector #1 five times.
Check the operating sound
of the injector #2 five times.
Check the operating sound
of the injector #3 five times.