Yamaha FJR13AY 2009 Service Manual page 508

ET3P66008
TROUBLESHOOTING (FJR13AE)
The starter motor fails to turn.
TIP
• Before troubleshooting, remove the following part(s):
1. Front cowling assembly
2. Fuel tank
3. T-bar
4. Throttle bodies
5. Storage compartment
1. Check the fuses.
(Main, signaling system, and igni-
tion)
Refer to "CHECKING THE FUS-
ES" on page 8-227.
OK ↓
2. Check the battery.
Refer to "CHECKING AND
CHARGING THE BATTERY" on
page 8-228.
OK ↓
3. Check the starter motor operation.
Refer to "CHECKING THE START-
ER MOTOR OPERATION" on page
8-237.
NG ↓
4. Check the starter motor.
Refer to "CHECKING THE START-
ER MOTOR" on page 5-44.
OK ↓
5. Check the relay unit (starting circuit
cut-off relay).
Refer to "CHECKING THE RE-
LAYS" on page 8-231.
OK ↓
6. Check the relay unit (diode).
Refer to "CHECKING THE RELAY
UNIT (DIODE)" on page 8-234.
OK ↓
7. Check the starter relay.
Refer to "CHECKING THE RE-
LAYS" on page 8-231.
OK ↓
ELECTRIC STARTING SYSTEM
NG →
Replace the fuse(s).
NG →
• Clean the battery terminals.
• Recharge or replace the battery.
OK →
Starter motor is OK. Perform the electric
starting system troubleshooting, starting
with step 5.
NG →
Repair or replace the starter motor.
NG →
Replace the relay unit.
NG →
Replace the relay unit.
NG →
Replace the starter relay.
8-25