Yamaha FJR13AY 2009 Service Manual page 415

EW3P61014
WARNING
If the bolt is tightened more than the speci-
fied angle, do not loosen the bolt and then re-
tighten it. Instead, replace the bolt with a new
one and perform the procedure again.
EC3P61033
NOTICE
• Do not use a torque wrench to tighten the
bolt to the specified angle.
• Tighten the bolt until it is at the specified
angle.
TIP
On a hexagonal bolt, note that the angle from
one corner to another is 60°.
7 5
10
4
L LLL L LLL L L LLL L L LLL L
8. Tighten:
• Crankcase bolts "11"–"31"
1 3
9
2 6
8
L LLL L L LLL L LLL
5-110
Crankcase bolt "11", "12"
24 Nm (2.4 m·kg, 17 ft·lb)
Crankcase bolt "13", "14"
12 Nm (1.2 m·kg, 8.7 ft·lb)
Crankcase bolt "15"–"31"
10 Nm (1.0 m·kg, 7.2 ft·lb)
TIP
Tighten the crankcase bolts in the proper tight-
ening sequence as shown.
16
13 21 18 15
25
11
12
31
28
CRANKCASE
17
20
19 22
23
14
24
29
30
27
26