Yamaha FJR13AY 2009 Service Manual page 315

Pinch bolt (rear side)
24 Nm (2.4 m·kg, 17 ft·lb)
TIP
Tighten the pinch bolts (rear side) one at a time,
making sure to tighten the first bolt again after
tightening the second bolt.
11.Tighten:
• Engine mounting bolts (top) "15"
(temporarily tighten)
• Engine bracket bolts (top) "13"
(temporarily tighten)
TIP
When temporarily tightened, the bolts "15" and
"13" should be flat against the engine and frame
surface.
12.Tighten:
• Engine mounting bolts (top) "15"
• Engine bracket bolts (top) "13"
Engine mounting bolt (top)
37 Nm (3.7 m·kg, 27 ft·lb)
Engine bracket bolt (top)
16 Nm (1.6 m·kg, 11 ft·lb)
8
1
14
4 11
5
6
13.Install:
• Engine bracket (left rear side) "1"
• Engine bracket bolt (left rear side) "2"
• Engine mounting bolts (left rear side) "3"
TIP
Do not fully tighten the bolts.
14.Tighten:
• Engine bracket bolt (left rear side) "2"
15.Tighten:
• Engine mounting bolts (left rear side) "3"
10
9
16.Install:
• Brake pedal "1"
TIP
Align the punch mark "a" on the brake pedal with
the punch mark "b" on the brake pedal pivot
shaft.
5-10
ENGINE REMOVAL
13
13
15
15
13
13
Engine bracket bolt (left rear
side)
32 Nm (3.2 m·kg, 23 ft·lb)
Engine mounting bolt (left rear
side)
16 Nm (1.6 m·kg, 11 ft·lb)
1
3
Brake pedal pinch bolt
8 Nm (0.8 m·kg, 5.8 ft·lb)
2