Yamaha FJR13AY 2009 Service Manual page 271

7. Remove:
• Suitable washer
8. Install:
• Oil seal clip "1" New
TIP
Adjust the oil seal clip so that it fits into the outer
tube's groove.
9. Install:
New
• Dust seal "1"
(with the fork seal driver "2")
Fork seal driver
90890-01502
YM-A0948
10.Fill:
• Front fork leg
(with the specified amount of the recom-
mended fork oil)
Recommended oil
Ohlins R & T43 (ACC-RT43F-00-
00)
Quantity
696.0 cm³ (23.53 US oz) (24.55
Imp.oz)
ECA14230
NOTICE
• Be sure to use the recommended fork oil.
Other oils may have an adverse effect on
front fork performance.
• When disassembling and assembling the
front fork leg, do not allow any foreign ma-
terial to enter the front fork.
11.After filling the front fork leg, slowly stroke the
damper rod assembly "1" up and down (at
least ten times) to distribute the fork oil.
TIP
Be sure to stroke the damper rod assembly
slowly because the fork oil may spurt out.
12.Slowly stroke the inner tube "1" up and down.
13.Before measuring the fork oil level, wait ten
minutes until the oil has settled and the air
bubbles have dispersed.
TIP
Be sure to bleed the front fork leg of any residual
air.
4-86
FRONT FORK