Table of Contents
Advertisement
4.3 System configuration of the optical reader as PROFINET IO device with switch and FB 79 or Ident profile
4.3
System configuration of the optical reader as PROFINET IO device
with switch and FB 79 or Ident profile
Note
Power supply using "Power over Ethernet" (PoE)
If the optical reader is supplied by PoE, for example when connected to a
SCALANCE X108POE, the Power IO RS232 cable is not needed.
①
②
Figure 4-2
SIMATIC MV500
Operating Instructions, 05/2019, C79000-G8976-C494-02
Optical sensor or light barrier (for trigger signal)
Object with code
Example: System configuration of the optical reader as PROFINET IO device and FB 79
or Ident profile
Network and system integration
55
Advertisement
Table of Contents
