Operate; Working With The Simatic Mv320 Optical Handheld Reader - Siemens SIMATIC MV320 Operating Instructions Manual

Hide thumbs Also See for SIMATIC MV320:

Table of Contents

Operate

5.1

Without metal stand

Proceed as follows to work with the reader:

1. Hold down the trigger button of the optical handheld reader.

2. The two blue beams sent out by the optical handheld reader are used for targeting.

The blue beams must be directed to the center of the barcode. The ideal read distance

between the device and barcode is approximately 10 cm.

As soon as the optical handheld reader is at the optimum read distance, the barcode is read.

To confirm that the barcode was read correctly, the optical handheld reader generates a

beep, vibrates and a green LED flashes.

Note

Changing factory settings

To change factory settings, scan in the appropriate code: See section Code configurations

(Page 33).

SIMATIC MV320 (as of FS: A3)

Operating Instructions, 03/2021, C79000-G8976-C643-01

Table of Contents