Siemens SIMATIC MV550 S Operating Instructions Manual page 165

"[REMOTEXMLUPLOADPARA]
Content-Disposition: form-data; name="xmlfile"
Content-Type: text/xml
<xmlFile>
[REMOTEXMLUPLOADPARA]
Content-Disposition: form-data; name="importtcp"
<on|off>
[REMOTEXMLUPLOADPARA]
Content-Disposition: form-data; name="importdp"
<on|off>
[REMOTEXMLUPLOADPARA]
Content-Disposition: form-data; name="importserial"
<on|off>
[REMOTEXMLUPLOADPARA]
Content-Disposition: form-data; name="importsec"
<on|off>
[REMOTEXMLUPLOADPARA]
Content-Disposition: form-data; name="importcodes"
<on|off>
[REMOTEXMLUPLOADPARA]
Content-Disposition: form-data; name="importcustomgui"
<on|off>
[REMOTEXMLUPLOADPARA]
Content-Disposition: form-data; name="importremoteclientip"
<on|off>
[REMOTEXMLUPLOADPARA]
"
Response
Structure and properties of the response:
● HTTP status code 200 (OK)
● Data:
– "2": XML upload and import were only partially successful.
– "1": XML upload and import was successful.
– "0": Import error.
SIMATIC MV500
Operating Instructions, 05/2019, C79000-G8976-C494-02
The optical reader restarts. The XML import must be performed again via the WBM to
obtain error analysis.
The optical reader restarts.
The XML import must be performed again via the WBM to obtain error analysis. The
"IN_OP" bit is set and access via the WBM is allowed again.
Process interfacing via an automation system (PLC, PC)
9.7 Remote client
165