Table of Contents
Advertisement
Operation
Operating Instructions D869 e-con - 00.0 - 06/2023
Order
Always adjust the clearance between the hook and the needle
after changing to a different needle strength ( Service
Instructions).
Disturbance
An incorrect hook clearance can cause the following disturbances:
• Changing to a thinner needle:
• Skip stitches
• Thread damage
• Changing to a thicker needle:
• Damage to the hook tip
• Damage to the needle
4.5
Threading the needle thread
WARNING
Risk of injury from needle tip and moving parts!
Puncture, cutting and crushing possible.
Turn off the machine before threading the thread.
Information
You will find a video with instructions regarding this chapter on
the Commander Delta control panel of the machine.
To start the instructional video:
1.
Switch on the machine.
2.
Click on the tile
A window opens named Threading: one needle.
The instructional video starts automatically.
on the control panel.
25
Advertisement
Table of Contents
