Editing The Segments Of A Seam - Dürkopp Adler D869 e-con Operating Instructions Manual

Programming Commander DELTA
Operating Instructions D869 e-con - 00.0 - 06/2023
5.8.3

Editing the segments of a seam

This section allows you to set the parameters for the current seam.
To edit the segments of a seam:
1. Press on the desired seam.
 The seam is highlighted in blue.
Fig. 60: Editing the segments of a seam (1)
2. Press on the symbol
 The interface used for setting the parameters opens:
Fig. 61: Editing the segments of a seam (2)
①
②
③
(1) - Manage segments
(2) - Parameters cross-segment
(3) - Parameters Segment
(4) - Parameters Segment End/
Seam end
.
④ ⑤
(5) - Parameters Segment Begin/
Seam Begin
(6) - List of adjustable parameters
⑥
109