Konica Minolta bizhub 3622 User Manual page 102

Understanding the printer menus
Menu item
Remote Syslog Facility
0 ‑ Kernel Messages
1 ‑ User‑Level Messages
2 ‑ Mail System
3 ‑ System Daemons
4 ‑ Security/Authorization
Messages*
5 ‑ Messages Generated
Internally by Syslogs
6 ‑ Line Printer Subsystem
7 ‑ Network News Subsystem
8 ‑ UUCP Subsystem
9 ‑ Clock Daemon
10 ‑ Security/Authorization
Messages
11 ‑ FTP Daemon
12 ‑ NTP Subsystem
13 ‑ Log Audit
14 ‑ Log Alert
15 ‑ Clock Daemon
16 ‑ Local Use 0 (local0)
17‑ Local Use 1 (local1)
18 ‑ Local Use 2 (local2)
19 ‑ Local Use 3 (local3)
20 ‑ Local Use 4 (local4)
21 ‑ Local Use 5 (local5)
22 ‑ Local Use 6 (local6)
23 ‑ Local Use 7 (local7)
Severity of Events to Log
0 ‑ Emergency
1 ‑ Alert
2 ‑ Critical
3 ‑ Error
4 ‑ Warning*
5 ‑ Notice
6 ‑ Informational
7 ‑ Debug
Remote Syslog Non‑Logged
Events
Off*
On
Admin's E‑mail Address
Note: An asterisk (*) next to a value indicates the factory default setting.
Description
Specify a facility code that the printer uses when sending log events to a remote
server.
Specify the priority level cutoff for logging messages and events.
Notes:
0 ‑ Emergency is the highest severity. 7 ‑ Debug is the lowest.
•
•
The selected severity level and anything higher are logged. For example,
selecting 4 ‑ Warning logs the severity levels from 0 to 4.
Send all events, regardless of severity level, to the remote server.
Send e‑mail notification of logged events to the administrator.
102