Service Schedule; Additional Information; Required Work - KTM RC 390 2018 Owner's Manual

Hide thumbs Also See for RC 390 2018:
Table of Contents

Advertisement

11

SERVICE SCHEDULE

11.1

Additional information

Any further work that results from the required work or from the recommended work must be ordered separately and can be invoiced sepa-
rately.
Depending on local operating conditions, service intervals may vary in your country.
11.2

Required work

Read out the fault memory using the KTM diagnostics tool.
Check that the electrical system is functioning properly.
Change the engine oil and oil filter and clean the oil screens.
Check the brake discs. (
Check the front brake linings. (
Check the rear brake linings. (
Check the tire condition. (
Check the tire air pressure. (
Check the brake lines for damage and leakage.
Check the brake fluid level of the front brake. (
Check the rear brake fluid level. (
Check the shock absorber and fork for leaks. Carry out maintenance according to requirements and purpose.
Clean the dust boots of the fork legs. (
Check the chain, rear sprocket, and engine sprocket. (
p. 105)
p. 109)
p. 113)
p. 125)
p. 127)
p. 106)
p. 110)
p. 83)
(
p. 159)
p. 92)
every 15,000 km (9,300 mi)
every 7,500 km (4,650 mi)
after 1,000 km (620 mi)
76
Every two years
Every year

Advertisement

Table of Contents
loading

Table of Contents