Applying The Brakes - KTM RC 390 2018 Owner's Manual

Hide thumbs Also See for RC 390 2018:
Table of Contents

Advertisement

10
RIDING INSTRUCTIONS
10.5

Applying the brakes

Warning
Danger of accidents Moisture and dirt impair the brake system.
Brake carefully several times to dry out and remove dirt from the brake linings and the brake discs.
Warning
Danger of accidents A spongy pressure point on the front or rear brake reduces braking efficiency.
Check the brake system and do not continue riding until the problem is eliminated. (Your authorized KTM workshop will be glad
to help.)
When conditions allow (incline, road situation, etc.), you can shift into a higher gear.
Release the throttle while simultaneously pulling the clutch lever, shift into the next
gear, release the clutch and open the throttle.
Info
You can see the positions of the 6 forward gears in the figure. The neutral or idle
position is between the first and second gears. First gear is used for starting off
or for steep inclines.
The operating temperature is reached when 4 bars of the temperature indicator
light up.
401950-11
Accelerate only up to a speed suitable for the road surface and weather conditions. Par-
ticularly in bends, do not shift, and accelerate very carefully.
To shift down, brake if necessary and close the throttle at the same time.
Pull the clutch lever and shift into a lower gear, release the clutch lever slowly and open
the throttle or shift again.
Switch off the engine if you expect to be standing for a long time.
If the malfunction indicator lamp
the engine, and contact an authorized KTM workshop.
lights up during a trip, stop immediately, switch off
69

Advertisement

Table of Contents
loading

Table of Contents