16
ELECTRICAL SYSTEM
16.2
Installing the battery
–
Pull back positive terminal cover
–
Disconnect positive cable
–
Detach rubber band
–
Pull the battery up and out of the battery holder.
Info
Never operate the motorcycle with a discharged battery or without a battery. In
both cases, electrical components and safety devices can be damaged. In this
case the vehicle is no longer roadworthy.
V00623-10
Main work
–
Position the battery in the battery holder.
Guideline
The terminals of the battery must face upwards.
Battery (ETZ-9-BS) (
–
Reconnect rubber band
–
Position positive cable
V00623-11
–
Position positive terminal cover
2
.
3
from the battery.
4
.
p. 179)
1
.
2
and mount and tighten the screw.
3
.
129