16
ELECTRICAL SYSTEM
16.4
Changing the ABS fuses
Warning
Fire hazard Incorrect fuses overload the electrical system.
–
Only use fuses with the required ampere value.
–
Do not bypass or repair fuses.
Info
Two fuses for the ABS are located under the protective cap next to the negative terminal of the battery. These fuses protect the
return pump and the hydraulic unit of the ABS. The third fuse, which protects the ABS control unit, is located in the fuse box.
Preparatory work
–
Switch off the ignition by turning the ignition key to the position
–
Remove the front rider's seat. (
–
Remove the battery cover. (
To change the fuse of the ABS hydraulic unit:
–
Take off the protection cap and remove fuse
V00624-10
p. 84)
p. 94)
Info
You can recognize a faulty fuse by a burned-out fuse wire
Warning
Fire hazard Incorrect fuses overload the electrical system.
–
Only use fuses with the required ampere value.
–
Do not bypass or repair fuses.
.
1
.
A
.
133