KTM RC 390 2018 Owner's Manual page 121

15 WHEELS, TIRES
–
Clean the thread of the wheel spindle and screw
–
Clean and grease wheel spindle.
Long-life grease (
–
Position the front wheel and insert the wheel spindle.
The brake linings are correctly positioned.
–
Tighten screws
Guideline
Screw, fork stub
–
Mount and tighten screw
Guideline
Screw, front wheel spindle
–
Loosen screws
–
Position wheel speed sensor
Guideline
K00718-10
Screw, wheel speed sensor holder
–
Position the reflector and fender.
–
Mount and tighten screws
Guideline
Screw, front fender
–
Operate the hand brake lever repeatedly until the brake linings are in contact with the
brake disc and there is a pressure point.
–
Take the motorcycle from the front lifting gear. (
p. 189)
4
.
3
.
4
.
5
in the drill hole. Mount and tighten screw
7
.
3 .
M8 15 Nm
(11.1 lbf ft)
M8 26 Nm
(19.2 lbf ft)
M6 8 Nm (5.9 lbf ft)
M6 7 Nm (5.2 lbf ft)
p. 82)
119
6
.