Adjusting The Free Travel Of The Foot Brake Lever - KTM RC 390 2018 Owner's Manual

14 BRAKE SYSTEM
14.10

Adjusting the free travel of the foot brake lever

Warning
Danger of accidents The brake system fails in the event of overheating.
If there is no free travel on the foot brake lever, pressure builds up in the brake system on the rear brake.
–
Set the free travel on the foot brake lever in accordance with the specification.
–
Disconnect spring
–
Move the foot brake lever back and forth between the end stop and the contact to the
foot brake cylinder piston and check free travel
Guideline
Free travel at foot brake lever
» If the free travel does not meet specifications:
–
Adjust the free travel of the foot brake lever.
–
Reconnect spring
V00160-10
1 .
3... 5 mm (0.12... 0.2 in)
1
.
A
.
( p. 115)
115