Table of Contents
Advertisement
6
CONTROLS
6.14
Closing the filler cap
–
Lift the cover
Note
Danger of damage The ignition key may break if overloaded.
Damaged ignition keys must be replaced.
–
Push down on the filler cap to take pressure off the ignition key.
–
Turn the ignition key 90° clockwise.
–
Open the filler cap.
K00700-10
–
Remove the ignition key.
Warning
Fire hazard Fuel is highly flammable, toxic and a health hazard.
–
–
–
–
Close the filler cap.
–
Push down the filler cap until the lock engages.
K00701-10
1
of the filler cap and insert the ignition key in the lock.
Check the filler cap is locked correctly after closing.
Change your clothing in case of fuel spills on them.
Rinse the affected area immediately with plenty of water in the event of con-
tact with the skin.
29
Advertisement
Table of Contents
