Wheels, Tires; Removing The Front Wheel - KTM RC 390 2018 Owner's Manual

15

WHEELS, TIRES

15.1

Removing the front wheel

Preparatory work
–
Raise the motorcycle with the rear lifting gear. (
–
Lift the motorcycle with the front lifting gear. (
Main work
–
Remove screws
–
Remove screw
–
Loosen screw
–
Loosen screws
–
Unscrew screw
spindle out of the axle clamp.
–
Remove screw
Warning
Danger of accidents Damaged brake discs reduce the braking effect.
–
–
Holding the front wheel, withdraw the wheel spindle. Take the front wheel out of the
fork.
Info
Do not pull the hand brake lever when the front wheel is removed.
K00717-10
1
, take off reflector and push the fender to the side.
2 and pull wheel speed sensor
4
.
5
.
4
about 6 turns and press your hand on the screw to push the wheel
4
.
Always lay the wheel down in such a way that the brake disc is not damaged.
p. 80)
p. 81)
3 out of the hole.
117