Fuji Xerox C60 Instruction Manual page 27

GBC AdvancedPunch punching Patterns
Description
Numbers
For Plastic Comb Binding
DIE XEROX
ED200556
PB-20H A4
DIE XEROX
ED200557
PB-21H A4
For Colour Coil™ Binding
DIE XEROX
ED200558
C4-47H A4
For Twin Loop™ Binding
DIE XEROX
W2-23H- ED200559
RND A4
DIE XEROX
W3-34H- ED200C60
RND A4
DIE XEROX
W2-23H-SQ ED200561
A4
DIE XEROX
W3-34H-SQ ED200562
A4
For Velo® Binding
DIE XEROX
ED200563
VB-12H A4
ProClick® A4 34-Hole Binding
DIE XEROX
ED200564
PC-34H A4
For Loose-leaf Binding
DIE XEROX
2H-8mm ED200565
A4
DIE XEROX
4H-8mm ED200566
A4
The GBC AdvancedPunch comes standard with 1 x Die PB-21 Hole A4 punch size (ED200557)
Additional Die's are available for purchase from Fuji Xerox.
The approximate life of the Die is 500K punch cycles, replacement Die's are not covered under the service agreement
and these can be purchased from Fuji Xerox Supplies.
Punch die life will be increased if the wick material is lightly oiled every 50,000 punch cycles (approximately every
month) with the initially supplied oil or a quality machine oil such as 3-in-1 Oil. The customer is responsible for applying
this oil. Small deposits of oil will be observed around the perimeter of the punched holes until the excess oil is absorbed
(usually within 20 sheets).
Please refer to the GBC AdvancedPunch User Guide for instructions.
Part
Punching Pattern
26