Table of Contents
Advertisement
Space Requirements
Space requirements for the full system are listed earlier in this document
To enable a Fuji Xerox Service Representative to safely repair the server, the work area must measure at least 91.44 cm
square around the server.
The work surface of the network controller must not infringe on the space requirements by the print engine and any
attached accessories unless the work surface is a table that has wheels and can easily be moved. Refer to the print engine's
Customer Expectation Document.
There must be a minimum of 198.12 cm clearance from the floor to the nearest overhead obstructions.
All standard Fuji Xerox space requirements apply to this installation including overhead, shared, aisle or hallway, and
operator space. The customer is responsible to provide appropriate floor spacing and placement surface.
Storage and future availability of software that ships with the colour server is a customer responsibility. Fuji Xerox
personnel do not carry replacement materials.
Note: Power cords for the EX Print Server and the Integrated Fiery Color Server EX-i are approximately 2.3 meters in length.
Specifications
Features\ Model
Software Level
HARDWARE
Processors
Motherboard/Platform
Platform OS
System Memory (Minimum)
Hard Drives (Minimum)
DVD Drive
Serial Interface
USB Interfaces
Monitor Size
Fiery S/W
Stand
Removable Hard drive
Electrical
Height (mm)
Width (mm)
Depth (mm)
Weight (Kgs)
Stand
Height (mm)
Width (mm)
Depth (mm)
Weight (Kgs)
Xerox Fiery™ Print Server
Integrated Fiery Colour
Server EXi
v 2.0
Intel® Pentium® Processor
G1820, 2.7 GHZ
H81 (Haswell)
Linux
2 GB
500 GB
No
No
6
n/a
FS200
No
No
220 – 240v 10 A 50Hz
100 W (typical)
93
272
295
5.6
n/a
n/a
n/a
n/a
EX Print Server
v 2.0
Intel® Core i5-2400, 4Core,
PRO80-IV, 3.1 GHz
Q87 Express
Windows 10 Professional
4 GB
1 TB
DVD R/W
No
9
22" Flat Panel (with Stand option)
FS200Pro
Included
Optional
220-240v 10 A, 50Hz,
100 W (typical)
528
235
464
17
1,665
800
866
45
31
Advertisement
Table of Contents
