Fuji Xerox C60 Instruction Manual page 13

•
Gloss differential may be exhibited especially when printing on a coated stock or on a high-density image.
•
Colour or density variation among prints or on a print may be caused depending on paper being used or print
environment.
•
Due to its high temperature and pressure at image adhesion process, prints may exhibit some paper-wave.
•
Variation in Colour registration may be observed depending on ambient environment condition, paper types
used, paper weights etc
Print Quality & Colour Management
• The appearance of the document displayed on the monitor screen may not match the output print because the
monitor uses RGB colour space parameters.
• The customer is responsible for calibrating the Color C60/C70.
• For imported RGB images, optimal colour is achieved in the EPS format. Other imported file formats may produce
unexpected results.
• The specification for colour to colour mis-registration is equal to or less than 95 microns, evaluated on Colotech +
90gsm uncoated paper. Colour to colour mis-registration may vary outside of the specification when using
heavyweight papers above 90gsm.
Registration Specifications
Item
Lead Edge Registration*
Side Edge Registration
Skew along the Lead Edge (200mm)
Skew along the Side Edge (400mm)
Perpendicularity (400mm)
Parallelism (400mm)
Image Loss
•
Lead Edge
•
Trail Edge**
•
Side Edge**
Side 1-2 Registration (Lead Edge
Direction)
Side 1-2 Registration (Side Edge
Registration)
Magnification
Horizontal R/E Precision (280mm)
Applicable for 100%
Horizontal R/E Precision (280mm)
Applicable for 25 to 200%
Horizontal R/E Precision (280mm)
Applicable for 201 - 400%
Horizontal R/E Precision (400mm)
Applicable for 100%
Horizontal R/E Precision (400mm)
Applicable for 25 - 200%
Horizontal R/E Precision (400mm)
Applicable for 201 - 400%
Linearity (Vertical) 400mm span
Linearity (Horizontal) 280mm span
Linearity (Diagonall) 280mm span
* For paper <260mm long and <128 g/m2
** Add magnification variation for Trail and Side Edge
Effect of paper shrinkage due to environmental changes are not included.
Trays 1-4 includes
Tray 5 (Bypass)
OHCF (Trays 6-7)
Platen
± 1.1 mm
± 1.8 mm
± 1.6 mm
± 3.2 mm
± 1.7 mm
± 1.0 mm
4.0 mm
4.0 mm
3.5 mm
± 1.2 mm Will be larger
± 2.4 mm Will be larger
± 0.3%
± 0.5%
-
± 1.0%
-
± 2.0%
-
± 0.5%
-
± 1.0%
-
± 2.0%
-
± 0.7 mm
± 0.6 mm
± 0.7 mm
Document Handler
Platen
± 1.6 mm ± 1.8 mm
± 3.0 mm ± 2.4 mm
± 1.6 mm ± 1.7 mm
± 3.2 mm ± 3.5 mm
± 1.9 mm
± 1.3 mm
4.0 mm 4.0 mm
4.0 mm 4.0 mm
3.5 mm 3.5 mm
- ± 0.5%
± 0.7%
- ± 2.2%
- ± 3.3%
- ± 0.5%
± 0.7%
- ± 2.2%
-
- ± 0.9 mm
- ± 0.6 mm
- ± 0.7 mm
-
-
± 3.3
12