Regency Greenfire GF1500LLP-2 Owners & Installation Manual page 41

Optional WIFI App (Part #946-767)
Optional WIFI App (Part #946-767)
WIFI Dongle Installation Instructions
WIFI Dongle Installation
1. Remove the four Phillips head screws on the front
Note: If the appliance was completed with fin-
Front panel plate removed
2. Locate the WIFI dongle connection on the left side of the ECS V control
module.
WIFI dongle connection
3. Line up the tab on the controller with the notches on the dongle.
920-376
panel plate to gain access to the ECS V control
module.
ishing materials and access to the ECS V
cannot be gained from the front panel, see
manual regarding how to access the WIFI
dongle connection. Once access is gained,
proceed to step 2.
4. Insert the dongle cable into the controller and make sure it is properly seated.
Improperly seated:
Properly seated:
5. Apply Velcro strips to the bottom of the dongle and the inside of the unit
and place the control module and dongle inside the unit.
6. Reverse step 1 to close the unit.
IMPORTANT: See warnings and release on next page.
1
installation
Greenfire® GF1500L-2 Gas Fireplace
| 41
05.05.21