Configuring Display Settings - Planar Dome Md2/PCI Installation Manual

76 | Installing the Board and Driver in a Sun PCI Workstation
Configuring Display Settings
Before you configure your system for the Sun Common Desktop
Environment (CDE) or OpenWindows, you need to set the
monitor mode for your board. DOME provides a default
monitor mode that you can either use or override.
Read the following sections before you configure CDE or
OpenWindows:
• Using the Default Monitor Mode (page 77)
• Overriding the Default Monitor Mode (page 79)
• Using Visual Classes (page 83)
Then read the appropriate section for your windowing
environment:
• Running OpenWindows (page 87)
• Configuring CDE (page 88)