Planar Dome Md2/PCI Installation Manual page 38

24 | Installing the Board and Driver in a PC
To change display properties
1.
2.
3.
4.
Log on to Windows 2000 as administrator.
Right-click the desktop, and select Properties ->
Settings tab.
The Settings tab appears.
Select Default Monitor on DOME Md2/PCI, Md4/PCI,
Md5/PCI, or Md8/PCI from the Display box.
Make sure the Extend my Windows desktop onto
this monitor box is checked.
Select Advanced -> DOME tab to select a resolution and
refresh rate.
The DOME tab appears.