Installing The Pci Windows 2000 Driver - Planar Dome Md2/PCI Installation Manual

14 | Installing the Board and Driver in a PC

Installing the PCI Windows 2000 Driver

This procedure assumes the Windows 2000 operating
system is already installed on your computer. If it is not,
refer to the Microsoft Windows 2000 documentation.
Install all DOME boards before you install the driver.
See "Preparing for Board Installation" on page 8 for
instructions. Then restart your computer and install
the driver.
To install the driver
1.
2.
3.
4.
Turn on your computer, and start Microsoft Windows
2000 Professional.
Log on with administrator privileges.
Insert the WINDRIVER CD, and browse to find the
directory.
win2k\MdXPCI
Double-click Setup.exe.
The Setup.exe file is an InstallShield Wizard that guides you
through the installation process. This dialog box appears.