Table of Contents
Advertisement
42 | Installing the Board and Driver in a PC
Installing the PCI Windows NT 4.0 Driver
This procedure assumes that the Windows NT 4.0 operating
system is already installed on your computer. If it is not, refer to
the Microsoft Windows NT 4.0 documentation.
Install all DOME boards before you install the driver.
See "Preparing for Board Installation" on page 8 for
instructions. Then restart your computer and install
the driver.
To install the driver
1.
2.
3.
4.
5.
6.
Turn on power to the computer, and select
Windows NT Workstation Version 4.00 [VGA].
Log on with administrator privileges.
You need administrator privileges to change the
display settings.
Choose Start -> Settings -> Control Panel ->
Display icon -> Settings tab.
The Settings tab appears.
Click Display Type....
The Display Type dialog box appears.
Click Change... in the Adapter Type field of
the dialog box.
The Change Display dialog box appears.
Click Have Disk....
The Install From Disk dialog box appears, containing
this field:
Copy manufacturer's files from:
A:\
Advertisement
Table of Contents
