Table of Contents
Advertisement
7.
Installed
Md2/PCI board
8.
9.
10.
To install multiple boards
Repeat the process described in "Installing the Md2/PCI Board"
on page 69.
Remember these tips when you are installing multiple boards:
• You can install as many Md2/PCI boards as your computer's
• Each board requires less than 3 amps of +5V.
You can install different DOME boards in the same computer.
For example, you can install one Md2/PCI and one Md4/PCI
board in your Sun PCI workstation.
Press down until the board is firmly seated.
Secure the board with the screw for the backplate.
Replace the cover.
Turn on your workstation, and boot up with
the
option.
-r
power supply and available PCI slots can support.
Installing the Md2/PCI Board | 71
Advertisement
Table of Contents
