72 | Installing the Board and Driver in a Sun PCI Workstation
Connecting a Monitor
After you install the Md2/PCI board in your Sun PCI
workstation, connect one or two monitors to the board
with the cable provided.
To connect a monitor to the board
1.
2.
Connecting the
cable to a
grayscale monitor
Attach the D-shell connector to the Md2/PCI board,
securing the connection with the screws on the connector.
Attach each output cable to the appropriate BNC terminal
on your monitor. Refer to your monitor documentation for
more information.
Connecting the
cable to a
color monitor