Configuring Cde - Planar Dome Md2/PCI Installation Manual

88 | Installing the Board and Driver in a Sun PCI Workstation

Configuring CDE

CDE defaults to using a single frame buffer associated
with
configuration, copy the
to
This file is mostly comments, but the last line is the command
line used to start the server and bring up CDE. The default
line follows:
:
To use one or more DOME devices
To use one or more DOME devices, replace the second :0 with
the
For example, to use both heads of an Md2/PCI board, change
the line to this:
:0 Local local_uid@console root /usr/openwin/bin/Xsun \
If you need to use a different default visual class, add the
appropriate
To use a DOME device with a Sun console
To use a Sun console and an Md2/PCI board, change the line
to this:
:0 Local local_uid@console root /usr/openwin/bin/Xsun \
If you need to use a different default visual class, add the
appropriate
, the boot console. To change the startup
/dev/fb
/etc/dt/config/Xservers
0 Local local_uid@console root \
/usr/ openwin/bin/Xsun :0 -nobanner
option flag and the appropriate device parameter.
-dev
md2pci0
-dev /dev/
defclass
-dev /dev/fb -dev /dev/md2pci0.0 -nobanner
defclass
/usr/dt/config/Xservers
, and edit it there.
md2pci0
.0 -dev /dev/
option for each
-dev
option for each
-dev
file
.1 -nobanner
option.
option.