64 | Installing the Board and Driver in a PC
Additional Components for Windows NT 4.0
These additional DOME software components run on
Windows NT 4.0 systems using the Md2/PCI board. Only the
dynamic-link library is supplied with the driver. The other
components are additional cost items.
Dynamic-link library
The
functions that can link to DOME applications, such as the DOME
Image-Processing Library and the Calibration TQA system.
The DLL installs automatically when you load the
Windows NT 4.0 driver.
DIMPL library
The DOME Image-Processing Library, or the DIMPL library,
provides a group of functions for image manipulation. The
library uses the DirectDraw facilities in the Windows NT 4.0
operating system and works cooperatively with the
DOME driver.
DimplX control
The DimplX control is the ActiveX interface to the DIMPL
library. It provides an easy-to-use interface to the powerful
DIMPL functions. It also uses the DirectDraw facilities in
the Windows NT 4.0 operating system.
dynamic-link library (DLL) is a group of
mdpcint.dll