Standards and approvals
11.1
Certificates and approvals
11.1.1
ISO 9001 certificate
The Siemens quality management system for our entire product creation process
(development, production and sales) meets the requirements of ISO 9001.
This has been certified by DQS (the German society for the certification of quality
management systems).
11.1.2
Software license agreements
If the device is supplied with preinstalled software, you must observe the corresponding
license agreements.
11.1.3
UL approval
The following approvals are available for the device:
• Underwriters Laboratories (UL) according to the standard UL 61010-2-201 Second Edition,
File E85972 (PROG.CNTLR.)
• Canadian National Standard CAN/CSA-C22.2 No. 61010-2-201
Client SIMATIC IPC RC-545A
Operating Instructions, 03/2024, A5E53092314-AA
11
147