Procedure Details - Omron sysmac NA Series User Manual

1 Overview of the Ladder Monitor
1-2-2

Procedure Details

STEP1
Setting License
Step
Setting License
STEP2
Creating Applications
Step
Creating a Project
Setting Target
Controller
Creating Applica-
tions
Executing a Build
Operation
Additional Information
For the controller, no work is required to use the Ladder Monitor. Create the application using
the normal procedure.
STEP3
Mounting and Wiring
No special work is required to use the Ladder Monitor. Perform mounting and wiring according
to the normal procedure.
STEP4
Checking Operation and Starting Operation on the Actual System
No special work is required to use the Ladder Monitor. Transfer the data to the controller and
then HMI, confirm the operation, and start the actual system operation, according to the normal
procedures.
1 - 6
Description
Set the license to use the Ladder Monitor function. Sysmac Studio Version 1
Sysmac Studio
Description
operations
Create a project that
includes the HMI
and controller in
Sysmac Studio.
Set the target con- Use HMI − Internal
troller of the Ladder Devices in the Multiview
Monitor. Explorer of the Sysmac
Studio.
Create the HMI
application.
Convert the HMI HMI: Select Build HMI
project and controller from Project.
project into a form
Controller: Select Build
that the HMI can
Controller from the Proj-
execute.
ect.
Reference
Operation Manual (W504)
Reference
Sysmac Studio Version 1
Operation Manual (W504)
NA-series Programmable Ter-
minal Software User's Manual
(V118)
3-3-1 Device References on
page 3-4
Sysmac Studio Version 1
Operation Manual (W504)
NA-series Programmable Ter-
minal Software User's Manual
(V118)
Sysmac Studio Version 1
Operation Manual (W504)
NA-series Programmable Ter-
minal Software User's Manual
(V118)
NA-series Ladder Monitor User's Manual (V124)