Details Of Option Mode - Omron AX-OP05-E User Manual

LCD Digital Operator

3.3 Details of Option mode

Item
Language Setting language
Setting Date and Time for the LCD
Date and Time
digital operator
Set "Read lock" enable to disable, in
order to protect the parameter saved in
Read Lock
LCD digital operator from being
overwritten.
Please select the correct INV type
INV Type using LCD digital operator,
Select otherwise, "COM ERROR" will be
displayed automatically.
Sets the number of parameter sets for
R/W Storage
READ/WRITE mode.
Mode
(Refer to chapter 4 for more details.)
When LCD digital operator remains
without key operations for 1 minute,
Backlight LCD backlight will be turned off. When
Auto-Off a key is pressed it will turned on.
The Backlight Auto-Off function does
not work when trip happened.
Backlight The Orange backlight will be enabled
Flicker or disabled..
Use this function to return t o default
settings of LCD digital operator.
The next items will be reset:
1) Language: English
2) Date and time:2009/01/01 THU
00:00
Operator
3) Time format: 01:YY/MM/DD
Reset
4) Read lock: Disable
5) R/W Storage Mode: Quad
6) Backlight Auto-Off: Off
7) Backlight Flicker: Enable
After this, date and time setting is
required.
Check if LED and key etc. are normal
Check Mode
or not.
NOTE: Please do not execute the EEPROM check. Otherwise, the data (parameters/EzSQ program)
saved in LCD digital operator will be erased.
LCD Digital Operator User's Manual v0_90 110218.doc
Content Setting range
01: English
02: Deutsch
03: Français
04: Español
05: Italiano
06: Português
07: 日本語 (Japanese)
08: 中文 (Chinese)
09: Türkçe
10: PycckИЙ
Date: 2000/1/1~2099/12/31
Time: 00:00~23:59
Format 1~3
01: Enable
02: Disable
01: Type 1 (MX2, LX)
02: Type 2 (RX)
01: Single
02: Quad
01: Off
02: 1 minute
01: Enable
02: Disable
01: YES
02: NO
Key&Led Check, Lcd Check,
EEPROM Check, RTC
Check, Serial Loopback,
Debug Mode, Firmware
Version.
11 Issue 0.90 Draft
Default
01
2009/01/01
00:00
1
02
01
02
01
01
02
-