Regulations And Standards - Omron sysmac NA Series User Manual

Regulations and Standards

Conformance to EMC Regulations
Concepts
NA-series PTs are industrial electrical devices that are incorporated into various types of machines
and manufacturing equipment. The products conform to the relevant standards so that the machines
and equipment incorporating the Omron products can comply with EMC Regulations more easily.
Refer to the OMRON website (www.ia.omron.com) or ask your OMRON representative for the most
recent standards to which our products conform.
To ensure that your machine or equipment complies with EMC regulations, please observe the fol-
lowing precautions.
• The NA Unit is defined as an in-panel device and must be installed within a control panel.
• NA-series PTs complies with the emission standards. For the radiated emission requirements, in
particular, please note that the actual emission varies depending on the configuration of the con-
trol panel to be used, the connected devices, and wiring methods. Therefore, customers them-
selves must confirm that the entire machine or equipment conforms to EMC regulations, even you
are using a device that conforms to EMC regulations.
• You must use reinforced insulation or double insulation for the DC power supplies connected to
the NA Unit.
Caution:
This equipment is not intended for use in residential environments and may not provide adequate
protection to radio reception in such environments.
NA-series Ladder Monitor User's Manual (V124)
Regulations and Standards
19