True Fitness PERFORMANCE 100 Owner's Manual page 21

TREADMILL OVERVIEW (CONTINUED):
Console Assembly:
The console allows the user to set up a workout program and control the treadmill during a workout.
Note: For 'Console Overview and Operation Instructions' refer to Chapter 4.
Contact Heart Rate Pads:
Allows the user to check their heart rate without wearing a wireless chest strap.
Note: For increased safety and accuracy this feature should only be used when the belt speed is below 4 mph.
Safety (E-Stop) Key:
A tethered safety device designed to attach to both the user and the treadmill console. Removal of the key from the console will
stop belt motion to prevent injury in an emergency.
Note: The safety key must be in place on the treadmill, and should be attached to the user's clothing. The treadmill will not operate
if the safety key is not attached to the treadmill.
Belt:
The moving surface of the treadmill on which the user walks or runs.
Straddle Covers:
Stationary covers on either side of the belt, which allows the user to safely straddle the belt during startup or in the event of an
emergency.
Belt Adjustment Bolts:
An adjustment system that allows the users to adjust the belt tracking and tension as needed.
On/Off Switch:
Allows users to turn the power on or off to the treadmill.
Circuit Breaker:
A safety device designed to protect the treadmill from excessive electrical current.
Power Cord:
Delivers power from the wall outlet to the treadmill.
Leveling Feet:
An adjustable system used to aid in the leveling the treadmill.
Truefitness.com / 800.426.6570 / 636.272.7100
17