True Fitness PERFORMANCE 100 Owner's Manual page 19

TREADMILL ASSEMBLY STEPS
STEP 9 Rear Foot Leveling:
a) Ensure treadmill incline rack wheels and rear feet are
resting on the floor and not on cardboard, packaging, etc.
b) Use the pliers to loosen wing-nut (A) counter-clockwise.
c) Using a level or estimating by sight, turn section (B) of
the foot counter-clockwise to a proper height.
d) Tight wing-nut (A) to secure (B) section.
Note: The same adjustment applies to both sides.
STEP 10 Safety Key:
CHAPTER 2: ASSEMBLY GUIDE
a) Remove packaged Safety Key from the hardware kit.
b) Cut off the shorter piece of string as shown.
c) Attach Safety Key magnet to front of console as shown.
d) Attach clip to clothing at the beginning of any workout.
Note: Read the entire Owner's Manual before attempting any workout.
Note: Remove Safety Key from treadmill after each use.
Truefitness.com / 800.426.6570 / 636.272.7100
(CONTINUED)
:
15