Delta Servo - Delta MP1 Series User Manual

EcNavi Software Installation and Application
e. Buffer: the amount of commands that the system has not executed.
Status: the current status of the servo drive.
f.
6
5. IO Status: display the current status of the servo drive by visualizing the Status of
Information Slave.

6.2.10 Delta Servo

Click Delta Servo on the main screen, and the corresponding screen appears.
 Servo Capture / Compare
You can test the Capture and Compare functions of the Delta servo drive in the screen.
6-20
Click this button to switch the servo to On and click it again to switch it to Off.
Clears the current error of the servo drive.
Resets the currently recorded moving pulse number of the servo drive.
MP1 15" User Manual