15 ELECTRICAL SYSTEM
15.11
15.12
126
Adjusting the headlight range
V00369-10
Changing the combination instrument battery
E00901-10
V00371-10
V00372-10
Preparatory work
–
Check the headlight setting. (
Main work
–
1
Loosen screw
.
–
Adjust the headlight range by pivoting the headlight.
Guideline
The boundary between light and dark must be exactly on the
lower mark for a motorcycle with rider (instructions on how
to apply the mark: Checking the headlight setting).
Info
If you have a payload, you may have to correct the
headlight range.
–
1
Tighten screw
.
Preparatory work
–
Remove the headlight mask with the headlight. (
Main work
–
1
Remove screws
.
–
Pull the combination instrument upward out of the holder.
–
Using a coin, turn protection cap
wise and take it off.
–
Remove combination instrument battery
–
Insert the combination instrument battery with the label facing
outward.
Combination instrument battery (CR 2430) (
–
Check the O-ring of the protection cap for correct seating.
–
2
Position protection cap
using a coin.
–
Press any button on the combination instrument.
The combination instrument is activated.
–
Position the combination instrument in the holder.
–
Mount and tighten the screws with washers.
p. 125)
p. 122)
2
all the way counterclock-
3
.
p. 162)
and turn all the way clockwise