Removing The Seat; Mounting The Seat - KTM 250 EXC 2023 Owner's Manual

12 SERVICE WORK ON THE CHASSIS
12.20
12.21
78

Removing the seat

S03480-10
H02218-10

Mounting the seat

H02218-11
Guideline
Screw, bottom M12
shock absorber
Info
The heim joint for the shock absorber on the link fork
is Teflon coated. It must not be lubricated with grease,
nor with any other lubricants. Lubricants dissolve the
Teflon coating, thereby drastically reducing the service
life.
Finishing work
–
Remove the motorcycle from the lift stand. (
–
1
Remove screw on the left side.
–
Raise the rear of the seat, pull the seat back, and lift it off.
–
Mount the front of the seat on the two collar bushings of the
fuel tank, lower the seat at the rear, and push the seat forward.
–
Make sure the seat is latched in place correctly.
80 Nm (59 lbf ft)
Loctite ® 2701™
p. 64)