Table of Contents
Advertisement
11.15
Handlebar position
11.16
Adjusting the handlebar position
Warning
Danger of accidents A repaired handlebar poses a safety risk.
If the handlebar is bent or straightened, the material becomes fatigued. The handlebar may break as a
result.
–
Change the handlebar if the handlebar is damaged or bent.
(All standard models)
On the upper triple clamp, there are 2 holes at a distance
A
of
to each other.
Hole distance A
The holes on the handlebar support are placed at a distance
B
of
from the center.
Hole distance B
The handlebar can be mounted in four different positions. This
allows the handlebar to be mounted in the most comfortable
position for the rider.
M00993-10
(All special models)
On the upper triple clamp, there are 2 holes at a distance
A
of
to each other.
Hole distance A
The holes on the handlebar support are placed at a distance
B
of
from the center.
Hole distance B
The handlebar can be mounted in four different positions. This
allows the handlebar to be mounted in the most comfortable
position for the rider.
M00987-10
TUNING THE CHASSIS 11
15 mm (0.59 in)
3.5 mm (0.138 in)
15 mm (0.59 in)
3.5 mm (0.138 in)
61
Advertisement
Table of Contents
