18 SERVICE WORK ON THE ENGINE
18.5
146
S04901-10
Checking the gear oil level
Info
The gear oil level must be checked when the engine is cold.
E00912-10
–
Position the frame protector.
–
Mount and tighten screw
Guideline
Remaining screws,
chassis
–
Mount the cable ties.
Finishing work
–
Install the air filter box cover. (
–
Install the fuel tank.
(
–
Add 2-stroke oil. (
p. 49)
–
Prime the oil pump.
(
–
Mount the seat. (
p. 78)
–
Install the main silencer. (
–
Remove the motorcycle from the lift stand. (
Preparatory work
–
Stand the motorcycle upright on a horizontal surface.
Main work
–
Detach the foot brake lever spring.
–
Remove gear oil level monitoring screw
–
Check the gear oil level.
A small quantity of gear oil must run out of the drilled hole.
»
If no gear oil runs out:
–
Add the gear oil.
–
Mount and tighten the gear oil level monitoring screw.
Guideline
Screw, gear oil level
monitoring
–
Attach the foot brake lever spring.
1
with washer.
M5
5 Nm (3.7 lbf ft)
p. 79)
p. 85)
p. 141)
p. 82)
p. 64)
1
.
(
p. 148)
M6
8 Nm (5.9 lbf ft)